Polar Bear Air Conditioning & Heating Inc. Blog: Archive for February, 2012

Washington DC HVAC Contractor Tip: Things You Can Do to Make Your Heating System More Effective

Wednesday, February 29th, 2012

Have you ever wondered why it is too hot or too cold in your Washington DC home? You can always blame it on the thermostat or an open or closed window. Those are easy targets. But maybe the real culprit is your heating and cooling system, namely your furnace or air conditioner. Maybe these pieces of equipment have to work extra hard because of something as simple as a dirty filter that you should have cleaned or replaced.

Learning how to make your heating and cooling system more “effective” does not require a physics degree or an extensive knowledge of the refrigeration cycle. In most cases, it just takes common sense – and a little creativity.

For example, did you know that how your home is insulated can have a direct impact on how well your heating and cooling equipment functions? It sure can. If your walls, crawl spaces, or attic is poorly insulated or not insulated at all, your furnace and air conditioner will have to work harder to keep up – and keep you warm or cool. In some cases, your heating and cooling equipment might never be able to give you the desired temperature on your thermostat setting because the equipment has to work too hard to make up for lost heat or cooling due to poor insulation.

So what should you do? Find out if your home is properly insulated by having a load calculation or energy audit on your home. Any licensed and qualified heating and cooling contractor will be able to perform one of these tasks for you and show you where you might be losing too much of your indoor air to poor insulation. This same test can also detect any leakage through cracks in the foundation or joints or connections in ductwork. Windows and skylights are also an area of heat loss or gain. Installing awnings or trees can cut down on this loss or gain, too.

Of course, the most effective heating and cooling system is one that is serviced and properly maintained on a regular basis. If you have any questions on system maintenance, call Polar Bear and schedule a tune-up today.

Tags: Energy Savings, Heating, Washington DC
Posted in Heating | Comments Off on Washington DC HVAC Contractor Tip: Things You Can Do to Make Your Heating System More Effective

Washington DC Heating Question: Can Your Heating System Warn You of a CO Leak?

Wednesday, February 22nd, 2012

As everyone in Washington knows, carbon monoxide is a serious health risk. It is an odorless gas that is produced as a natural byproduct of combustion. So, any time something burns, carbon monoxide (CO) is released into the air.

As long as the area is properly ventilated, the carbon monoxide cannot build up in the air to a dangerous level of concentration. For example, if you are around a campfire or charcoal that is burning outside, you are generally safe.

In the home, the danger arises when combustion is not properly ventilated and this toxic gas is allowed to seep into our living spaces. If you use any gas, fuel or wood burning appliances in your home, you are at risk for exposure to carbon monoxide. To help mitigate that risk, it is important to know some warning signs. Your heating system gives off some warnings that can tip you off to danger, so be on the lookout for these three signals:

Carbon monoxide detector goes off. Some heating systems these days have built-in carbon monoxide detectors, which can provide an extra measure of safety. Whether you have one of these systems or not, your home should still be equipped with a CO detector. If it begins sounding the alarm, get everyone out of the house immediately.

A fume vent is leaking. Fuel-burning furnaces have vents to move combustion gases out of the house safely. If you notice this vent is leaking on your heating system, CO may be seeping into your house. Shut down the furnace, open windows for ventilation and have the fume vent repaired immediately.

Smoke backing up from the fireplace. If you have a fireplace and you notice smoke in the room while using it, stop using it immediately. Your chimney may be blocked or leaking, preventing the smoke from rising and venting properly, which means CO can e getting into your house. Do not use the fireplace again until you have had the chimney inspected.

Please take care and note this is just a simple guide. There are other risks and warnings of carbon monoxide. If you have any suspicion that there is CO in your home, immediately call Polar Bear Air Conditioning to look into the situation.

Tags: Carbon Monoxide, CO, Heating Repair
Posted in Heating | Comments Off on Washington DC Heating Question: Can Your Heating System Warn You of a CO Leak?

Happy President’s Day from Your Washington DC Area HVAC Contractor!

Monday, February 20th, 2012

Everyone at Polar Bear Air Conditioning and Heating wishes you a very happy President’s Day! We hope you all get a chance to take advantage of some of the great sales! It is also a great time to think about how you can make your community a better place. Lend a neighbor a helping hand or volunteer your time; everyone doing a little good can make a big difference! Being more green is also a good way to help you community, and upgrading your HVAC system can be a big part of that. If you have an older system that is using a lot of fuel, a new system will not only save you money but also help you make your home more environmentally friendly, which is good for everyone.

One of the traditions of celebrating Presidents Day is food made with cherries, in honor of George Washington, so here is a great recipe for some Cherry-Blueberry Pie:

“A fruity and fun surprise awaits you inside this double crusted cherry and blueberry pie.”

INGREDIENTS:

1 (15 ounce) package refrigerated pie

crusts

1/2 cup white sugar

2 tablespoons cornstarch

1/4 teaspoon ground cinnamon

1 (21 ounce) can cherry pie filling

1 1/2 cups frozen blueberries

1 egg white

1 teaspoon water

2 teaspoons sugar

DIRECTIONS:

Preheat the oven to 425 degrees F (220 degrees C).

Press one of the pie crusts into a 9 inch pie plate. In a large bowl, stir together 1/2 cup of sugar, cornstarch and cinnamon. Stir in the cherry pie filling and blueberries. Spoon into the pie crust. Top with the second crust, and press the edges to seal. Flute edges, or press with the tines of a fork. In a cup, whisk together the egg white and water with a fork. Brush over the top of the pie, then sprinkle with 2 teaspoons of sugar.

Bake for 45 to 55 minutes in the preheated oven, or until crust is golden brown. Cover the edges of the crust with aluminum foil if they appear to be getting too dark. Cool for at least 2 hours to allow the filling to set before serving.

This recipe is from allrecipes.com, visit their site for more details!

Tags: Holiday
Posted in Holiday | Comments Off on Happy President’s Day from Your Washington DC Area HVAC Contractor!

Happy Valentine’s Day from Your Washington D.C. Area Heating and Air Conditioning Contractor!

Tuesday, February 14th, 2012

We wish you a very happy Valentine’s Day! Valentine’s Day is the perfect time to show your appreciation to everyone who makes a difference in your life. Even a small gift, like a batch of cookies or a homemade card, can really make someone feel special. Your friends, your family, and your significant other will all have a fantastic Valentine’s Day if you take a moment to let them know how important they are to you.

Calling us for an HVAC upgrade might seem like a usual gift, but it can actually be something that benefits your whole family. An improved indoor air quality system can make your air cleaner and healthier, and a new heating system can make your home more comfortable and save you money by lowering your utility bills. Those are improvements that every member of your family can enjoy.

If you have any questions about upgrades for your heating and air conditioning system, give Polar Bear Air Conditioning a call today! And to help you celebrate this sweet holiday, here is a recipe for Chocolate Cakes with Liquid Centers:

“Warm, soft and gooey chocolate cakes. Perfect for that ubiquitous chocolate fix. A good-quality bittersweet chocolate is necessary for the success of these cakes.”

INGREDIENTS:

1/2 cup butter

4 (1 ounce) squares bittersweet

chocolate

2 eggs

2 egg yolks

1/4 cup white sugar

2 teaspoons all-purpose flour

DIRECTIONS:

Preheat oven to 450 degrees F (230 degrees C). Butter and flour four 4 ounce ramekins or custard cups.

In the top half of a double boiler set over simmering water, heat the butter and the chocolate until chocolate is almost completely melted.

Beat the eggs, egg yolks and sugar together until light colored and thick.

Beat together the melted chocolate and butter. While beating, slowly pour the chocolate mixture into the egg mixture, then quickly beat in the flour and mix until just combined.

Divide the batter between the four molds and bake at 450 degrees F (230 degrees C) for 6 to 7 minutes. The centers of the cakes will still be quite soft. Invert cakes on serving plates and let sit for about 15 seconds, then unmold. Serve immediately with fresh whipped cream, if desired.

For more details, visit allrecipes.com.

Tags: Holiday, HVAC Upgrades, Valentine's Day
Posted in Holiday | Comments Off on Happy Valentine’s Day from Your Washington D.C. Area Heating and Air Conditioning Contractor!

Capitol Hill Heating Repair Question: What Are Flue Gas Spill Switches?

Wednesday, February 1st, 2012

While some components of a heating system make sense to the average homeowner in Capitol Hill – think blower fan, thermostat and air ducts – others are more esoteric and prone to bouts of head scratching.

So, you may find yourself asking “what the heck is a flue gas spill switch?”

As you know, gas heating appliances produce heat by means of combustion. The gas line feeds gas into the appliance, the gas is ignited, and the burning gas produces heat. It’s a simple concept that goes all the way back to our caveman ancestors building fires to keep warm, and it is the same process in gas furnaces, boilers and water heaters.

In addition to producing the cozy heat we love in the winter time, this combustion process also releases gases. Known collectively as “flue gases,” some of these – carbon monoxide being the most notorious – can be very toxic. This why we have flues or chimneys in our homes– to give these gases a means of egress.

A flue gas spill switch is designed to shut down the furnace if these gases start seeping out. It is made up of a sensor or series of sensors that detect heat outside the flue, not unlike the flame sensor in your furnace. If flue gases start to escape and pass by the sensor, the sensor heats up and signals the furnace to shut down. This cuts off the power and gas, so that no more flue gases can leak into the home and create a health concern.

If your furnace has been abruptly shutting down, it could be your flue gas spill switch trying to tell you that you have a leaky or cracked flue. If this is the case, you want to have it repaired right away. The constant off and on is not good for the furnace, and more importantly, those flue gases can be exceptionally hazardous to your family’s health.

Tags: Capitol Hill, Furnaces, Heating, Heating Repair, Washington DC
Posted in Heating | Comments Off on Capitol Hill Heating Repair Question: What Are Flue Gas Spill Switches?

Polar Bear Air Conditioning & Heating Inc. Blog