Skip navigation

Menu
Polar Bear Air Conditioning & Heating Inc

Washington DC Heating Guide: How to Maintain High Efficiency Filters to Reduce Stress on Your Heat Pump

The filter on your heat pump is an integral part of your Washington DC home’s comfort system. Without that filter, the device will quickly be subjected to an influx of debris and contaminants that can get into the machinery and the air being filtered into your home. As a result, you need to make sure you properly maintain the filters to reduce stress on your heat pump.

Change Your Filters

High efficiency filters are designed to remove as much of the airborne contaminants in the air as possible. This is fantastic for keeping your indoor air clean. But if you don’t properly maintain the filter, air quality can worsen and your heat pump is put under unnecessary stress. Specifically, the extremely tight knit filter, designed to stop nearly anything from getting through, gets clogged.

Now your Washington DC heat pump is forced to work much harder to draw the air it needs from outside and heat or cool your home. On top of that, the filter is filled with contaminants that can start to leak back into the air supply, actually making your indoor air quality worse than it would be otherwise. That’s why it is so important to clean your filters on a regular basis (for permanent filters) and replace them if they are one time use.

Recommended Filters

You have options as to which types of filters you use for your heat pump. Filters come in multiple options, from super high MERV rated filters that trap up to 99% of all contaminants as small as 0.3 microns.

Electrostatic filters are especially efficient because they extract contaminants of all types – from dust and mold to smoke and gas fumes. A good filtration system should effectively remove anything from the air without needing replacement too often.

Permanent filters tend to offer the best protection against airborne contaminants and generally need to be cleaned once a month. HEPA filters are often permanent and while each filter is different, these are often extremely effective at minimizing contaminants in the air without putting stress on your heat pump.

We all know that high efficiency filters are great to have in your home because they remove contaminants from the air. This keeps your indoor air clean and healthy by preventing pollutants from circulating throughout your forced air system. But what most people don’t know is that if you don’t maintain your air filters, they can actually cause your heat pump to work much harder. When high-efficiency filters get clogged, they can restrict airflow and cause stress to your heat pump. Not to mention making your indoor air quality worse! The contaminants that were caught by the air filter might now start getting back into the air supply, actually making your indoor air quality worse. It is easy to see why it is so important to change your air filter regularly, especially if they are high efficiency.

To schedule a maintenance appointment for your Washington DC heat pump today, call Polar Bear Air Conditioning!

Comments are closed.