Polar Bear Air Conditioning & Heating Inc Blog : Posts Tagged ‘Energy Saving’

Keeping Warm During a Power Outage: Washington DC Heating Tip

Monday, November 12th, 2012

Power outages are a very scary thing—especially when they happen in the winter in Washington DC. With winter approaching, it is a good idea to know how you can keep your family warm when there isn’t any power. We’ve put together a few tips for our customers in the Washington area so they can make sure their family is safe when the power goes out.

Close off a Room

If you’re going to be without power for several days, choose a room as your home base. Close all the doors and windows. Hang blankets on the walls and over the windows. You want to keep as much heat inside the room. Heating one small room is much more efficient that trying to heat your whole home on limited resources.  This will maximize the heat retention for all that body heat that you naturally generate while you sleep.

Heat Source

If you have a gas-fired water heater you can take a warm shower or bath to raise your body temperature. Even if you have an electric water heater, the tank will stay warm for some time after the power goes out. During the day, if there is sunlight, try to sit in the sun as much as possible. Also, try to allow as much sun to entire your house and heat your home.

Extra Clothes, Blankets, Sleeping Bags and Tents

Gather any extra blankets, clothing, sleeping bags or quilts. Your body generates more heat than you think. Conserving that heat is a critical. You can also set up camping tents to help you retain even more heat.

Stay off the Ground

The ground can absorb a lot of your body heat while you sleep. Put down a mattress in your room or sleep on a couch. This will allow you to retain more of your body heat.

If you have any other questions about how to maximize your heat in your Washington home during a power outage, call the experts at Polar Bear. We offer heating services to the Washington DC area!

Continue Reading

Washington DC Air Conditioning Tip: Energy Efficient Home Cooling

Monday, May 21st, 2012

Having an energy efficient air conditioning system in place is a great way to keep cool in the summer for less. But that is far from the only thing you can do to help reduce your energy bills throughout the hottest months of the year. In fact, there are several simple steps you can take to start cutting down on your cooling costs right now and lighten the cooling load that your Washington DC air conditioning system has to bear.

One of the main things to remember when you are trying to keep your house cool is that every door and window is potentially letting in warmer air from outside and letting the cooler indoor air escape. You can cut down on this considerably if you simply take the time to seal up these access points and any others you are able to find.

Putting up plastic over unused doors and windows and checking all areas of the house for drafts and adequate insulation will dramatically reduce the cost of keeping your house cool in the summer. Also, you can keep the sun from warming up your indoor air by drawing the blinds, particularly on those windows that let in the hot afternoon sun.

Putting up light colored siding and reflective roofing will also do a great deal to keep your overall cooling costs down. That is because these materials are able to direct the heat of the sun away from your house rather than letting it be absorbed so that it can heat up the inside. The vast majority of the heat that your air conditioning system has to remove from your house comes in through your roof and walls, so blocking this access point is extremely helpful in keeping your overall cooling costs down.

All of these are steps you can take to reduce the total cooling load that your Washington DC air conditioning system has to deal with. But if you want your system to continue to function at peak energy efficiency, you will have to take care of it as well.

This typically means having someone come in once a year to perform a thorough inspection of your air conditioning system and to clean out any debris that may have accumulated over time. Having this done will make it possible for your air conditioner to continue to function at the highest possible levels of energy efficiency for years to come. To schedule a maintenance visit, give Polar Bear Air Conditioning a call today!

Continue Reading

What Is SEER? A Question From Washington DC

Wednesday, August 24th, 2011

If you’ve been looking at air conditioners in Washington, you’ve probably noticed that they all seem to have a SEER rating. But what does this actually mean?

The SEER, which stands for Seasonal Energy Efficiency Ratio, is a measure of how energy efficient a particular air conditioning model is. So when you’re shopping around for the best deal on an air conditioner for your home, this is something you’ll absolutely want to pay attention to.

Interpreting SEER Ratings

The SEER rating system is relatively simple – the higher the SEER, the more energy efficient the product. But because a higher price tag typically comes with a higher SEER rating, it’s important to know just how much more efficient a higher rated unit will be. It helps you decide whether paying significantly more for a higher rated unit is worth it in long term savings. Will it actually save you enough each month to make up for the difference in price?

Evaluating Your Energy Usage

A big factor here is how much you will use your air conditioner. If you live in a place with very hot and humid summers where the air conditioning runs constantly, you’re probably best off with the highest SEER you can find. When you consume that much energy to keep your home cool, you want to get as much as possible out of it, and that’s what a high SEER model can do for you.

On the other hand, if you live in an area that doesn’t have the harshest summers, you may be better off with a slightly less efficient (and therefore cheaper) model. Keep in mind, too, that the actual percentage increase in energy efficiency goes up by smaller and smaller increments the higher in SEER ratings you get. For instance, while a 10 SEER unit may be almost 20% more efficient than an 8 SEER model, a 12 SEER is only about 10% more efficient than that 10 SEER.

Finding the Right Balance

The best way to decide what SEER rating is best for you is to determine the annual cooling costs with your current unit and then calculate your savings in dollars based on the percentage each model would improve your efficiency. If you don’t currently have an air conditioner, this can be a bit tricky, but a professional contractor or air conditioning salesman can help you estimate your total monthly cooling costs with the various units.

Continue Reading